HA5801-500
Nuevo
HA5801-500
Amplificador WiFi 500Mw, 5.8GHz, Outdoor
HyperAmp® HA5801-500 is a 5.8 GHz outdoor amplifier for 802.11a wireless LANs. It is compatible with IEEE 802.11a OFDM radios as well as radios using Direct Sequence or Frequency Hopping Spread Spectrum modulation.
The HA5801-500 is a fixed gain amplifier with up to 500 mW or +27 dBm of output power. The gain is fixed at the factory at +10 dB for TX and 10 dB for Rx. The receive gain compensates for cable losses and actually increases the receive sensitivity of most wireless LAN radios. This feature permits long cable runs with no degradation in operating range. Since this is a outdoor amplifier it can improve range and reliability by placing up to full transmit power as well as 12 dB of receive gain directly at the antenna where it is most effective.
Designed for outdoor installations, the HA5801-500 features rugged weatherproof construction to ensure years of reliable operation in the harshest environments. Included with this model, the DC Power Injector provides power to the amplifier through the antenna cable, simplifying installation. Current-sensing circuits provide remote amplifier diagnostic LEDs. In addition, this unit provides effective lightning protection with multi-strike capability.
Note:
This Hyperlink bi-directional amplifier is designed for burst half-duplex operation. It is not intended for constant transmit or CW operation. Operation of the amplifier in CW mode will damage the amplifier and void the warranty.
For additional information and complete specifications, click on the data sheet link below.
WiFi Amplifier 5800 MHz
Features:
Transmit Power | 500 mW (27 dBm) |
Frequency | 5725-5850 MHz (Call for other frequencies) |
Receive Gain | 10 dB nom. |
Transmit Gain | 10 dB |
Dimensions | 4.5 x 2.5 x 1.3 (inches) 117 x 64 x 33 (mm) |
Weight | .68 lbs. (.30 Kg) |
Water Resistant Rating (Outdoor Models) | IEC 60529 IPX7 |
Operating Mode | Bi-directional, half-duplex Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode |
Operating Temperature | -40°C to 50°C (-40°F to 122°F) |
Current Draw | 1 Amps Peak Tx and 0.05A Peak Rx |
Supply Voltage | 8-12VDC |